|
Easy and safe to operate, the Model E-5 allows the secure, precise positioning of weight loss coupons in pressurized systems. This innovative coupon holder mounts on existing valves and requires neither special access fittings nor special tools to operate.
The E-5s exclusive vent and locking cap nut system creates a smooth main body design. This eliminates protruding side mounted venting & locking devices which could be a hazard if broken off under pressure.
The E-5s precision locking system makes it possible to insert its 3/8 OD insertion rod easily in a pressurized system. To secure flat mounted coupons, simply position the coupon alignment with the pipe wall to the measured depth and tighten the locking cap nut.
|
Method of Operation |
Hand / Mechanical Insertion |
|
Maximum Operating Pressure |
Maximum 5,000 PSI for Mechanical insertion. Structural rating is 10,000 PSI. |
|
Maximum Operating Temperature |
450` F (1100` F optional) |
|
Standard Insertion Length |
24 Inches (up to 48 Inches optional) |
|
Diameter of Insertion Rod |
Standard 3/8 OD |
|
Size |
1" NPT |
|
Seals |
Teflon |
|
Material of Construction |
316 SS complies with NACE standard MR-01-75.
Suitable for sour service. |
|
Standard |
Rod Coupon |
|
Options |
Flat coupon.
Fits single or double flat. Size
of entry valve determines
maximum coupon width. For
proper alignment of flat
coupons, the insertion handle is
utilized as an indicator, allowing
for a precise view of coupon
alignment. |
Request
Literature |
