|
Easy and safe to operate, the Model E-3A allows the secure, precise positioning of chemical injection in pressurized systems. This innovative injection tool mounts on existing valves and requires neither special access fittings nor special tools to operate.
The E-3A’s exclusive vent and locking cap nut system creates a smooth main body design. The E-3A is equiped with a secondary vent for high solids systems.
The E-3A’s precision locking system makes it possible to insert it’s 5/16 OD insertion rod easily in a pressurized system. To secure the injection tool, simply position the Atomizer Tip alignment with the pipe wall to the measured depth and tighten the locking cap nut.
|
Method of Operation |
Hand / Mechanical Insertion |
|
Maximum Operating Pressure |
Maximum 3,000 PSI for Mechanical insertion. Structural rating is 10,000 PSI. |
|
Maximum Operating Temperature |
450` F (1100` F optional) |
|
Standard Insertion Length |
24 Inches (up to 48 Inches optional) |
|
Diameter of Insertion Rod |
Standard 5/16 OD |
|
Size |
1/2" NPT through 2" NPT male threads. |
|
Seals |
Teflon |
|
Material of Construction |
316 SS complies with NACE standard MR-01-75.
Suitable for sour service. |
|
Standard |
Rod Coupon |
|
Options |
Atomizer Tip |
Request
Literature |
