|
Easy
and safe to operate, the Model E-3 allows the secure,
precise positioning of weight loss coupons in
pressurized systems. This innovative coupon holder
mounts on existing valves and requires neither special
access fittings nor special tools to operate.
The E-3s exclusive vent and locking cap nut system
creates a smooth main body design. This eliminates
protruding side mounted venting & locking devices which
could be a hazard if broken off under pressure.
The E-3s precision locking system makes it possible to
insert its 3/8 OD insertion rod easily in a pressurized
system. To secure fl at mounted coupons, simply position
the coupon alignment with the pipe wall to the measured
depth and tighten the locking cap nut.
|
Method of Operation |
Hand Insertion |
|
Maximum Operating Pressure |
Maximum 3000 PSI for hand insertion.
Structural rating is 10,000 PSI. |
|
Maximum Operating Temperature |
450` F (1100` F optional) |
|
Standard Insertion Length |
24 Inches (up to 72 Inches optional) |
|
Diameter of Insertion Rod |
Standard 3/8 OD |
|
Size |
3/4" NPT mount |
|
Seals |
Teflon |
|
Material of Construction |
316 SS complies with NACE standard MR-01-75.
Suitable for sour service. |
|
Standards |
Rod Coupon |
|
Options |
Flat coupon Fits single or double fl at.
Size of entry valve determines maximum
coupon width. For proper alignment of fl at
coupons, the insertion handle is utilized as
an indicator, allowing for a precise view of
coupon alignment. |
Request
Literature |
